logo
Bom preço  on-line

detalhes dos produtos

Para casa > produtos >
Máquina de classificação da pilha de bateria
>
Prismatic Cell Battery Grading Machine

Prismatic Cell Battery Grading Machine

Nome da Marca: XWELL
Número do modelo: XW-32
Quantidade mínima: 1 unidade
preço: USD 7900/pcs
Detalhes da embalagem: CAIXA DE MADEIRA
Condições de pagamento: T/T, Western Union, L/C
Informações pormenorizadas
Lugar de origem:
China
Certificação:
CE
Canais:
32
Atendimento Personalizado:
Sim
Tensão e corrente:
5V/10A; 5V/20A; 5V/30A
Dissipação de Calor:
para entrar no ar naturalmente e expelir o ar para cima
Economia global de energia:
mais de 70%
Intervalo de medição da tensão:
0-5V, resolução 1MV
Intervalo de tensão da bateria:
Carga 0-4,5 V: descarga 4,5-2 V
precisão da tensão:
±(1‰ leitura +1‰ completa)
Modo de controle:
Trabalho com equipamento de ligação a computadores, controlo de FCL
Habilidade da fonte:
100 peças por mês
Destacar:

prismatic cell grading machine with warranty

,

battery cell grading machine for prismatic cells

,

automated prismatic battery grading equipment

Descrição do produto
Prismatic Cell Battery Grading Machine
 
 

Product overview:

The prismatic cell battery grading machine grades the prismatic cell capacity by performing several charge-discharge cycle tests on prismatic cells to obtain accurate battery capacity.

For battery cell manufacturers, the battery grading machine is one of the necessary machines in the cell manufacturing process.

For battery pack assemblers, battery capacity testing and grading must be carried out before assembling the battery pack, cells with high capacity consistency are grouped, and then the prismatic cell sorting machine is used for OCV/IR testing and sorting, thereby improving the consistency of the cells in the same battery pack, so as to assemble the battery pack with the best performance.

 

1. Basic composition of equipment

The equipment is mainly composed of computer, communication interface and battery detection cabinet. The battery detection cabinet is composed of a fixture and a board for placing the fixture, a constant current and constant voltage source, a storage control circuit, a sampling circuit, a single-chip microcomputer and a control panel.

 

 
 
Product Specification
 
Working power Three-phase five-wire system AC380V±10%, 50HZ
Work environment Temperature 0-40 degrees, relative humidity ≤80%
Heat dissipation to enter the air naturally and exhaust the air upward
Overall energy saving over 70%
Channel Parameter
Voltage measuring range 0-5V, 1MV resolution
Battery voltage range Charge 0-4.5V: Discharge 4.5-2V
Constant voltage range 2.5V-4.5V
voltage accuracy ±(1‰ reading +1‰ full)
Current accuracy ±(1‰ reading +1‰ full)
Software Function
Control mode Computer connection equipment work, FCL control
Communication mode RS485 baud rate 57,600
Process set A maximum of 32 work steps and 256 cycles are se
Charging mode Constant current, constant pressure
Charging cutoff condition Voltage, current, time, capacity
Discharge constant current
Discharge cut-off condition Voltage, time, capacity
Defensive function Overvoltage, undervoltage, overcurrent, undercurrent, overcapacity, etc
Time range Set it anywhere from 0 to 30,000 minutes
Time accuracy ≤±1‰
Sampling inspection period ≤3S
Minimum frequency of data recording ≤5S
Battery sorting By capacity, time, discharge platform, etc
Data processing Data, graphs, and loop diagrams

 

Prismatic Cell Battery Grading Machine 0

 

Prismatic Cell Battery Grading Machine 1

 

XWELL can provide different fixtures for different types of cells

 

Prismatic Cell Battery Grading Machine 2

Prismatic Cell Battery Grading Machine 3